**This is an old revision of the document!** ----

<code> rtl8169_probe alloc_etherdev netdev_init pci_set_drvdata adjust_pci_Device rtl8169_irq_mask_and_ack rtl_soft_reset rtl8169_get_mac_version rtl8169_init_phy rtl_hw_phy_config [one of several versions of rtlXXXXX_X_hw_phy_config] pci_write_config_byte mdio_write rtl8169_phy_reset phy_reset_enable phy_reset_pending rtl8169_set_speed set_speed netdev_link_up rtl8169_open rtl8169_setup_tx_resources rtl8169_setup_rx_resources rtl8169_refill_rx_ring rtl8169_populate_rx_descriptor rtl_hw_start rtl_soft_reset rtl8169_transmit RTL_W8 rtl8169_poll rtl8169_process_tx_packets netdev_tx_complete rtl8169_process_rx_packets (netdev_rx_err) iob_put netdev_rx rtl8169_refill_rx_ring rtl8169_populate_rx_descriptor rtl8169_irq rtl8169_irq_disable rtl8169_irq_mask_and_ack rtl8169_irq_enable rtl8169_close rtl8169_hw_reset rtl8169_irq_mask_and_ack rtl8169_free_tx_resources free_dma rtl8169_free_rx_resources free_dma free_iob rtl8169_remove pci_get_drvdata rtl8169_hw_reset rtl8169_irq_mask_and_ack unregister_netdev netdev_nullify netdeV_put </code>