✎ soc:2008:dverkamp:journal:start

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Daniel Verkamp: COMBOOT Support ======

===== Journal =====

==== 19 May 2008 ====

Journal created. 

==== 21 May 2008 ====

  * Image type detection by filename: check image->uri?
  * arch/i386/README.i386: use libpm for COM32 transitions, librm for 16-bit COMBOOT
  * hook_bios_interrupt -> hook the COMBOOT API ints (for 16-bit) with stubs that call back into gPXE?
  * REAL_CODE, PHYS_CODE in inline asm
  * memcpy_user, real_to_user
  * i386_all_regs, regs_t (ordered like PUSHA) types
  * _virt_to_phys to switch from etherboot-style virtual address space to flat physical addresses (COM32)
  * basemem_packet (BASEMEM_PACKET_LEN = 1514)
  * arch/i386/include/virtaddr.h: VIRTUAL/PHYSICAL/REAL_CS/DS
  * install_rm_callback_interface
  * Split COMBOOT and C32 or use the same image type for both?

=== TODO ===

  * Check current PXE API support
  * Find out how to add config option for image type

==== 23 May 2008 ====

  * Had meeting with mdc and mcb30; discussed basic architecture for COMBOOT support
  * Discovered how near RET from 16-bit COMBOOT works - INT 20h at byte 0 of segment (documented as part of PSP in COMBOOT spec)
  * Sample hook_bios_interrupt/call_prot code from mcb30; see [[soc/2008/dverkamp/notes/hook_bios_interrupt]]
  * Finished basic 16-bit COMBOOT loading and INT 20h and INT 21h AH=02h hooks {{:soc:2008:dverkamp:journal:dverkamp-may-23-2008.png|}}

==== 24 May 2008 ====

  * Figured out and fixed why RET wasn't working - top of stack wasn't being cleared
  * Cleaned up and committed beginnings of COMBOOT API

Trace: • journal • journal • journal • balajirrao • pxekniferomomatic • the_kernel_2 • week11 • week9 • journal

Navigation

Search

Toolbox

QR Code