====== Differences ====== This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
|
sanboot:iscsi_via_linux [2007/11/05 06:43] mcb30 created |
sanboot:iscsi_via_linux [2007/11/10 17:34] (current) mcb30 |
||
|---|---|---|---|
| Line 9: | Line 9: | ||
| To add a disk image file as an iSCSI target, you need to add the following two lines to ///etc/ietd.conf//: | To add a disk image file as an iSCSI target, you need to add the following two lines to ///etc/ietd.conf//: | ||
| - | Target iqn.2007-08.name.dns.my:image | + | Target iqn.2007-08.name.dns.target.my:iscsiboot |
| Lun 0 Path=/path/to/image/file.img,Type=fileio | Lun 0 Path=/path/to/image/file.img,Type=fileio | ||
| - | where ///path/to/image/file.img// is the path to your disk image file, and //name.dns.my// is your DNS name in reverse order. | + | where ///path/to/image/file.img// is the path to your disk image file, and //name.dns.target.my// is your DNS name in reverse order. |
| (For completeness, you should also replace //2007-08// with the year and month in which you first obtained your DNS domain. The iSCSI naming schemes are somewhat pedantic, but it won't affect anything in practice; as long as the target name is unique then everything will work just fine.) | (For completeness, you should also replace //2007-08// with the year and month in which you first obtained your DNS domain. The iSCSI naming schemes are somewhat pedantic, but it won't affect anything in practice; as long as the target name is unique then everything will work just fine.) | ||
| - | Make a note of the iSCSI target IQN that you chose (//iqn.2007-08.name.dns.my:image// in the above example). You are now ready to | + | Make a note of the iSCSI target IQN that you chose (//iqn.2007-08.name.dns.target.my:iscsiboot// in the above example). You are now ready to |
| * [[sanboot:iscsi_boot|Boot from your iSCSI target image]] | * [[sanboot:iscsi_boot|Boot from your iSCSI target image]] | ||
