====== Differences ====== This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
romburning:tg3 [2008/03/06 06:27] mcb30 |
romburning:tg3 [2008/03/06 07:28] (current) mcb30 |
||
|---|---|---|---|
| Line 7: | Line 7: | ||
| ===== Preparing the ROM image ===== | ===== Preparing the ROM image ===== | ||
| - | Copy the gPXE ROM image (e.g. //bin/pci_0e11_00ca.rom//) to a FAT-formatted floppy disk or USB drive. | + | Copy the gPXE ROM image (e.g. //bin/0e1100ca.rom//) to a FAT-formatted floppy disk or USB drive. |
| ===== Preparing the tools ===== | ===== Preparing the tools ===== | ||
| Line 22: | Line 22: | ||
| * "Run FreeDOS from CD-ROM (return to command prompt)" | * "Run FreeDOS from CD-ROM (return to command prompt)" | ||
| - | You should now see an //X:\>// prompt. Type | + | You should now see an //X:\>// prompt. Type: |
| - | cd b57udiag | + | cd \b57udiag |
| b57udiag -ver | b57udiag -ver | ||
| - | You should see something like | + | You should see something like: |
| - | X:\>cd b57udiag | + | X:\>cd \b57udiag |
| X:\B57UDIAG>b57udiag -ver | X:\B57UDIAG>b57udiag -ver | ||
| **************************************************** | **************************************************** | ||
| Line 37: | Line 37: | ||
| C Brd:Rv Bus PCI Spd Base Irq EEP MAC Fmw Configuration | C Brd:Rv Bus PCI Spd Base Irq EEP MAC Fmw Configuration | ||
| - ------- ------- --- --- ---- -- ---- ------------ ---------- ------------- | - ------- ------- --- --- ---- -- ---- ------------ ---------- ------------- | ||
| - | 0 5703:B0 05:04:0 32 33 FC50 11 128k 00095B1C29D9 5703-v.235 WMp,auto | + | 0 5703:B0 05:04:0 32 33 FC50 11 128k 00110AE99C0B 5703-v.235 WMp,auto |
| + | 1 AC1K:B5 05:00:0 32 33 FF7F 9 4k 00095B1C29D9 2.5 auto | ||
| - | This shows the list of Broadcom cards in the machine. | + | This shows the list of Broadcom cards in the machine. Select the card that you wish to burn gPXE into, and identify its card number (from the left-hand "C" column in the listing). |
| - | In order to burn the rom we need to run the following | + | To burn gPXE into the card, type: |
| - | <file> | + | b57diag -c 0 -pxe c:\0e1100ca.rom |
| - | A:\>b57diag.exe -c 0 -pxe c:\tg3-hp.rom | + | |
| - | **************** | + | where //-c 0// specifies the card number of the card that you wish to burn gPXE into, and //c:\0e1100ca.rom// is the path to the gPXE ROM image on your FAT-formatted floppy disk or USB drive. You should see something like: |
| - | Copyright notice | + | |
| - | *************** | + | X:\B57UDIAG>b57udiag -c 0 -pxe c:\0e1100ca.rom |
| - | C Brd:Rv Bus PCI Spd Base Irq EEP MAC Fmw Configuration | + | **************************************************** |
| - | ---------------------------------------------------------------------------------------------------------------------- | + | Copyright(c) 2000-2007 Broadcom Corporation |
| - | 0 5703:B0 05:04:0 32 33 FC50 11 128K 012345567810 5703-v.235 WMp,auto | + | Broadcom NetXtreme User Diagnostics 10.53 (07/27/07) |
| + | **************************************************** | ||
| + | C Brd:Rv Bus PCI Spd Base Irq EEP MAC Fmw Configuration | ||
| + | - ------- ------- --- --- ---- -- ---- ------------ ---------- ------------- | ||
| + | 0 5703:B0 05:04:0 32 33 FC50 11 128k 00110AE99C0B 5703-v.235 WMp,auto | ||
| | | ||
| - | 0 5703:B0 05:04:0 32 33 FC50 11 128K 012345567810 5703-v.235 WMp,auto | + | 0 5703:B0 05:04:0 32 33 FC50 11 128k 00110AE99C0B 5703-v.235 WMp,auto |
| - | Updating PCI Rom Header with Vendor ID = 0x14e4 Device ID = 0x16c7 | + | |
| Updating PXE-UNDI16 code (length = 59908 bytes ) ... | Updating PXE-UNDI16 code (length = 59908 bytes ) ... | ||
| Programing 59908 bytes to NVRAM offset 00001A60 | Programing 59908 bytes to NVRAM offset 00001A60 | ||
| - | <counter that ends at 59908 for my rom> | + | Updating Directory... |
| - | Updating Directory | + | |
| code len = 0000ea04 | code len = 0000ea04 | ||
| sram_start_address = 00010000 | sram_start_address = 00010000 | ||
| code_start_address = 00001a60 | code_start_address = 00001a60 | ||
| Reading current NVRAM ... OK | Reading current NVRAM ... OK | ||
| - | Programing... 512 | + | Programing : 512 |
| - | | + | Totally 1 card(s) has been programmed. |
| - | Totally 1 card(s) has been programmed | + | |
| - | </file> | + | |
| Reboot the machine and enter the BIOS setup. You should see gPXE show up as an option in your BIOS's boot selection menu. | Reboot the machine and enter the BIOS setup. You should see gPXE show up as an option in your BIOS's boot selection menu. | ||
| Congratulations on successfully burning gPXE into your network card! | Congratulations on successfully burning gPXE into your network card! | ||
| + | |||
