romburning:tg3 - Etherboot/gPXE Wiki

====== Differences ====== This shows you the differences between two versions of the page.

--- romburning:tg3 [2008/03/06 05:51]
mcb30 Style fixups; part 1
+++ romburning:tg3 [2008/03/06 07:28] (current)
mcb30
@@ Line 7: / Line 7: @@
 ===== Preparing the ROM image =====
-Copy the gPXE ROM image (e.g. //bin/pci_0e11_00ca.rom//) to a FAT-formatted floppy disk or USB drive.
+Copy the gPXE ROM image (e.g. //bin/0e1100ca.rom//) to a FAT-formatted floppy disk or USB drive.
 ===== Preparing the tools =====
@@ Line 17: / Line 17: @@
 Boot from the CD and select the following sequence of options:
-  - "Continue to boot FreeDOS from CD-ROM"
+  * "Continue to boot FreeDOS from CD-ROM"
-  - "Install to harddisk using FreeDOS setup" (which won't actually install anything to your hard disk)
+  * "Install to harddisk using FreeDOS setup" (which won't actually install anything to your hard disk)
-  - The language of your choice
+  * The language of your choice
-  - "Run FreeDOS from CD-ROM (return to command prompt)"
+  * "Run FreeDOS from CD-ROM (return to command prompt)"
-You should now see an //X:\>// prompt.  Type
+You should now see an //X:\>// prompt.  Type:
-    cd b57udiag
+    cd \b57udiag
     b57udiag -ver
-You should see something like
+You should see something like:
-    X:\>cd b57udiag
+    X:\>cd \b57udiag
     X:\B57UDIAG>b57udiag -ver
     ****************************************************
@@ Line 35: / Line 35: @@
     Broadcom NetXtreme User Diagnostics 10.53 (07/27/07)
     ****************************************************
-    C  Brd:Rv   Bus      PCI  Spd  Base  Irq  EEP   MAC           Fmw         Configuration
+    C Brd:Rv    Bus   PCI Spd Base Irq EEP     MAC         Fmw     Configuration
-    ---------------------------------------------------------------------------------------
+    - ------- ------- --- --- ---- -- ---- ------------ ---------- -------------
-  5703:B0  05:04:0  32   33   FC50  11   128K  012345567810  5703-v.235  WMp,auto
+5703:B0 05:04:0  32  33 FC50 11 128k 00110AE99C0B 5703-v.235 WMp,auto
+AC1K:B5 05:00:0  32  33 FF7F  9   4k 00095B1C29D9 2.5        auto
-This shows the list of Broadcom cards in the machine.  We in this case have only the one card.
+This shows the list of Broadcom cards in the machine.  Select the card that you wish to burn gPXE into, and identify its card number (from the left-hand "C" column in the listing).
-We want to check the current payload in the card, so we need to run the following
-<file>
+To burn gPXE into the card, type:
-    X:\B57UDIAG\>b57diag.exe -c 0 -dir
-    ****************
-    Copyright notice
-    ***************
-    C	Brd:Rv	Bus		PCI	Spd	Base	Irq		EEP		MAC		Fmw		Configuration
-    ----------------------------------------------------------------------------------------------------------------------
-	5703:B0	05:04:0		32	33	FC50	11		128K		012345567810	5703-v.235	WMp,auto
-	5703:B0	05:04:0		32	33	FC50	11		128K		012345567810	5703-v.235	WMp,auto
-    Entry	Type		SRAM Addr	EEP Offset		Length		Execute		Version
-    	Bootcode	08003000	00000200		00001860	CPUE(2)		5703-v2.35
-	PXE		00010000	00001A60		0000EA04	no		v73.67.80
-</file>
-This lists the current NRAM filesystem on the card. Please note the PXE rom on this card is already a gPXE rom, however the same process holds true for replacing the rom
-In order to burn the rom we need to run the following
+    b57diag -c 0 -pxe c:\0e1100ca.rom
-<file>
+where //-c 0// specifies the card number of the card that you wish to burn gPXE into, and //c:\0e1100ca.rom// is the path to the gPXE ROM image on your FAT-formatted floppy disk or USB drive.  You should see something like:
-    A:\>b57diag.exe -c 0 -pxe c:\tg3-hp.rom
-    ****************
+    X:\B57UDIAG>b57udiag -c 0 -pxe c:\0e1100ca.rom
-    Copyright notice
+    ****************************************************
-    ***************
+    Copyright(c) 2000-2007 Broadcom Corporation
-    C	Brd:Rv	Bus		PCI	Spd	Base	Irq		EEP		MAC		Fmw		Configuration
+    Broadcom NetXtreme User Diagnostics 10.53 (07/27/07)
-    ----------------------------------------------------------------------------------------------------------------------
+    ****************************************************
-	5703:B0	05:04:0		32	33	FC50	11		128K		012345567810	5703-v.235	WMp,auto
+    C Brd:Rv    Bus   PCI Spd Base Irq EEP     MAC         Fmw     Configuration
+    - ------- ------- --- --- ---- -- ---- ------------ ---------- -------------
+5703:B0 05:04:0  32  33 FC50 11 128k 00110AE99C0B 5703-v.235 WMp,auto
-	5703:B0	05:04:0		32	33	FC50	11		128K		012345567810	5703-v.235	WMp,auto
+5703:B0 05:04:0  32  33 FC50 11 128k 00110AE99C0B 5703-v.235 WMp,auto
-    Updating PCI Rom Header with Vendor ID = 0x14e4 Device ID = 0x16c7
     Updating PXE-UNDI16 code (length = 59908 bytes ) ...
     Programing 59908 bytes to NVRAM offset 00001A60
-    <counter that ends at 59908 for my rom>
+    Updating Directory...
-    Updating Directory
     code len		= 0000ea04
     sram_start_address	= 00010000
     code_start_address	= 00001a60
     Reading current NVRAM ... OK
-    Programing... 512
+    Programing : 512
+    Totally 1 card(s) has been programmed.
-    Totally 1 card(s) has been programmed
-</file>
 Reboot the machine and enter the BIOS setup.  You should see gPXE show up as an option in your BIOS's boot selection menu.
 Congratulations on successfully burning gPXE into your network card!

Trace:

Navigation

Search

Toolbox

QR Code