====== Differences ====== This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
romburning:tg3 [2008/03/06 05:32]
mcb30 Added device ID to the code; no point having this sort of thing in the wiki. 		romburning:tg3 [2008/03/06 07:28] (current)
mcb30
Line 7: Line 7:
 ===== Preparing the ROM image ===== ===== Preparing the ROM image =====
  
-Copy the gPXE ROM image (e.g. //bin/pci_0e11_00ca.rom//) to a FAT-formatted floppy disk or USB drive.+Copy the gPXE ROM image (e.g. //bin/0e1100ca.rom//) to a FAT-formatted floppy disk or USB drive.
  
 ===== Preparing the tools ===== ===== Preparing the tools =====
  
-Download the Broadcom Diagnostics Utility from [[http://​www.broadcom.com/​support/ethernet_nic/driver-sla.php?​driver=570x-diag]].  Burn this image to CD using your favourite CD burning method.+Download the Broadcom Diagnostics Utility from [[http://​www.broadcom.com/​docs/driver_download/570x/B57udiag-10.53.iso]].  Burn this image to CD using your favourite CD burning method.
  
 ===== Burning the gPXE ROM ===== ===== Burning the gPXE ROM =====
  
-Boot from the CD selecting option 1.+Boot from the CD and select the following sequence of options:
  
-At the next prompt choose the "​Install to HD using FD setup" ​option, please note this won't actually install to your HDD without more confirmation+  * "​Continue to boot FreeDOS from CD-ROM"​ 
 +  * "​Install to harddisk ​using FreeDOS ​setup" ​(which ​won't actually install ​anything ​to your hard disk) 
 +  * The language of your choice 
 +  * "Run FreeDOS from CD-ROM (return to command prompt)"​
  
-At the next screen, choose your language, and then select "Run FreeDOS from CD ROM (return to command ​prompt)"+You should now see an //​X:​\>// ​prompt.  Type:
  
-You should now have an X:\ prompt+    cd \b57udiag 
 +    b57udiag -ver
  
-From here change your current working directory to X:\B57UDIAG\+You should see something like:
  
-From here you will want to execute the following command +    X:\>cd \b57udiag 
-    ​B67UDIAG.exe ​-ver+    ​X:​\B57UDIAG>​b57udiag ​-ver 
 +    **************************************************** 
 +    Copyright(c) 2000-2007 Broadcom Corporation 
 +    Broadcom NetXtreme User Diagnostics 10.53 (07/​27/​07) 
 +    **************************************************** 
 +    C Brd:​Rv ​   Bus   PCI Spd Base Irq EEP     ​MAC ​        ​Fmw ​    ​Configuration 
 +    - ------- ------- --- --- ---- -- ---- ------------ ---------- ------------- 
 +    0 5703:B0 05:​04:​0 ​ 32  33 FC50 11 128k 00110AE99C0B 5703-v.235 WMp,auto 
 +    1 AC1K:B5 05:​00:​0 ​ 32  33 FF7F  9   4k 00095B1C29D9 2.5        auto
  
-You should see something like+This shows the list of Broadcom cards in the machine. ​ Select the card that you wish to burn gPXE into, and identify its card number (from the left-hand "​C"​ column in the listing).
  
-    X:​\B57UDIAG\>​b57diag.exe -ver +To burn gPXE into the card, type:
-    **************** +
-    Copyright notice +
-    *************** +
-    C Brd:​Rv Bus PCI Spd Base Irq EEP MAC Fmw Configuration +
-    ---------------------------------------------------------------------------------------------------------------------- +
-    0 5703:​B0 05:​04:​0 32 33 FC50 11 128K 012345567810 5703-v.235 WMp,​auto +
-     +
-This shows the list of broadcom cards in the machine. We in this case have only the one card. +
-We want to check the current payload in the card, so we need to run the following ​   ​+
  
 +    b57diag -c 0 -pxe c:​\0e1100ca.rom
  
-    X:​\B57UDIAG\>​b57diag.exe ​-c 0 -dir +where //-c 0// specifies ​the card number of the card that you wish to burn gPXE into, and //​c:​\0e1100ca.rom// is the path to the gPXE ROM image on your FAT-formatted floppy disk or USB drive. ​ You should see something like:
-    **************** +
-    Copyright notice +
-    *************** +
-    C Brd:​Rv Bus PCI Spd Base Irq EEP MAC Fmw Configuration +
-    ---------------------------------------------------------------------------------------------------------------------- +
-    0 5703:​B0 05:​04:​0 32 33 FC50 11 128K 012345567810 5703-v.235 WMp,​auto +
-     +
-    0 5703:​B0 05:​04:​0 32 33 FC50 11 128K 012345567810 5703-v.235 WMp,​auto +
-    Entry Type SRAM Addr EEP Offset Length Execute Version +
-    Bootcode 08003000 00000200 00001860 CPUE(2) 5703-v2.35 +
-    0 PXE 00010000 00001A60 0000EA04 no v73.67.80 +
-     +
-This lists the current NRAM filesystem on the card. Please note the PXE rom on this card is already a gPXE rom, however ​the same process holds true for replacing ​the rom+
  
-In order to burn the rom we need to run the following +    X:\B57UDIAG>b57udiag ​-c 0 -pxe c:\0e1100ca.rom 
-    A:\>b57diag.exe ​-c 0 -pxe c:\tg3-hp.rom +    ​**************************************************** 
-    **************** +    Copyright(c) 2000-2007 Broadcom Corporation 
-    Copyright ​notice +    Broadcom NetXtreme User Diagnostics 10.53 (07/27/07) 
-    *************** +    ​**************************************************** 
-    C Brd:​Rv Bus PCI Spd Base Irq EEP MAC Fmw Configuration +    C Brd:​Rv ​   Bus   ​PCI Spd Base Irq EEP     ​MAC         ​Fmw     ​Configuration 
-    ​---------------------------------------------------------------------------------------------------------------------- +    - ------- ------- --- --- ---- -- ---- ------------ ---------- ------------- 
-    0 5703:​B0 05:​04:​0 32 33 FC50 11 128K 012345567810 5703-v.235 WMp,​auto+    0 5703:B0 05:​04:​0 ​ 32  33 FC50 11 128k 00110AE99C0B ​5703-v.235 WMp,auto
     ​     ​
-    0 5703:​B0 05:​04:​0 32 33 FC50 11 128K 012345567810 5703-v.235 WMp,​auto +    0 5703:B0 05:​04:​0 ​ 32  33 FC50 11 128k 00110AE99C0B ​5703-v.235 WMp,auto
-    Updating PCI Rom Header with Vendor ID = 0x14e4 Device ID = 0x16c7+
     Updating PXE-UNDI16 code (length = 59908 bytes ) ...     Updating PXE-UNDI16 code (length = 59908 bytes ) ...
     Programing 59908 bytes to NVRAM offset 00001A60     Programing 59908 bytes to NVRAM offset 00001A60
-    ​<counter that ends at 59908 for my rom> +    Updating Directory...
-    ​Updating Directory+
     code len = 0000ea04     code len = 0000ea04
     sram_start_address = 00010000     sram_start_address = 00010000
     code_start_address = 00001a60     code_start_address = 00001a60
     Reading current NVRAM ... OK     Reading current NVRAM ... OK
-    Programing... 512 +    Programing ​: 512 
-    ​ +    Totally 1 card(s) has been programmed.
-    Totally 1 card(s) has been programmed+
  
 Reboot the machine and enter the BIOS setup. ​ You should see gPXE show up as an option in your BIOS's boot selection menu. Reboot the machine and enter the BIOS setup. ​ You should see gPXE show up as an option in your BIOS's boot selection menu.
  
 Congratulations on successfully burning gPXE into your network card! Congratulations on successfully burning gPXE into your network card!
 +

Trace:

QR Code
QR Code romburning:tg3 (generated for current page)