✎ soc:2010:andreif:journal:week3

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== Week 3 [ 7 Jun 2010 - 13 Jun 2010 ] =====

==== Day 1 [ 7 Jun 2010 ] ====

Git commit: [[http://git.etherboot.org/?p=people/andreif/gpxe.git;a=commit;h=52f6bbd8471893361f264d3749b3f8c78df224b2|52f6bbd8471893361f264d3749b3f8c78df224b2]]

I managed to get the .irq routine implemented. I'm not sure how to test this, so I'll ask on email. I hope to get another round of feedback from people after which I'll send a patch containing the driver.

Once that was done I did one of those things I <del>hate</del> enjoy so much: manual labor! My old PC was broken into pieces plus I had to go out and get some SATA cables (it had none) because I want to set up a development environment on it too. Since there was no room for it in my room, I had to move the furniture around a bit so it had somewhere to go. Eventually I managed to turn it on and it now boots into its' old OS. Tomorrow I'll format the disk and set up a new Linux distro.

==== Day 2 [ 8 Jun 2010 ] ====

Git commit: [[http://git.etherboot.org/?p=people/andreif/gpxe.git;a=commit;h=1807a8d7b9ca412cb7fa72b457b30cbc33b3069a|1807a8d7b9ca412cb7fa72b457b30cbc33b3069a]]

So I managed to test the .irq routine today by chainloading undionly.kpxe and it doesn't work :(. It gives a timeout when trying to dhcp. The weird thing is, if I activate debugging then dhcp works. I'll ask about this tomorrow.

Finally, the old PC is set up and lspci revealed that the nVidia NIC I have has a CK804 Ethernet Controller, device id 0x0057, which is currently supported by Linux's forcedeth driver. On tomorrow's list are setting up a driver skeleton for the forcedeth driver and seeking some help on #etherboot regarding pcnet32's .irq.

==== Day 3 [ 9 Jun 2010 ] ====

me.away()

==== Day 4 [ 10 Jun 2010 ] ====

pcnet32 git commit: [[http://git.etherboot.org/?p=people/andreif/gpxe.git;a=commit;h=94c29d96c34aaa97d22664c1f52ba0564d8c2894|94c29d96c34aaa97d22664c1f52ba0564d8c2894]]

forcedeth git commit: [[http://git.etherboot.org/?p=people/andreif/gpxe.git;a=commit;h=5f415833099737de5af558892488930032a58caf|5f415833099737de5af558892488930032a58caf]]

mdc helped me today to fix the bug I had in my .irq implementation. Well, it wasn't actually there, but in the .transmit, where I disabled the interrupts by mistake. Fixed, and now the .irq works too. I noticed that after chainloading UNDI the driver was really slow. Tomorrow I'll start digging on this and see how other drivers fare.

Also, I set up a basic skeleton for the new forcedeth driver. By the end of the week I want to contact the Linux driver devs and see if they can give me the documentation they had.

==== Day 5 [ 11 Jun 2010 ] ====

me.awayAgain()

==== Day 6 [ 12 Jun 2010 ] ====

Git commit: [[http://git.etherboot.org/?p=people/andreif/gpxe.git;a=commit;h=930c8b5335125c6aaaf4c13863b92bfdf1b57549|930c8b5335125c6aaaf4c13863b92bfdf1b57549]]

Today was pretty much about testing. I still did not manage to find out why UNDI works so slow, but I did fix a bug that cleared some interrupt-enabling flags from CSR0 thanks to mdc's observation that I should watch the Linux driver's CSR0 accesses.

After that, I tested to see the difference between another driver's UNDI and normal modes. I tested by setting the ''ethernet1.virtualDev'' field in my vms .vmx file to "e1000". The Intel PRO/1000 downloads an 100mb file in 29s in "normal" mode and in 56s under UNDI. That's approximately 2x slower in UNDI. Like I've mentioned before my pcnet32 driver gets the 100mb file in 39-45s in "normal" mode and in ~120s under UNDI.

Another thing I noticed today was how much the time it takes to download the file varies. Sometimes my pcnet32 driver would get the image in 26s, other times in 50s or more. I've noticed this behaviour in the e1000 driver too. Not too sure what the cause is.

Anyway, I'm determined to post a patch containing the driver tomorrow, even though it still has problems. I don't expect this to be accepted,
the purpose is to expose it to more experienced eyes. Finally, I'll shoot an email to some of the forcedeth driver devs tomorrow regarding the docs.
Trace: • week8 • week6 • week9 • week4 • week8 • week7 • week1 • week5 • week7 • week5 • week4
Navigation

Search

Toolbox

QR Code
